← Back to troubleshooter
Poor first-layer adhesion
3 Causes3 Solutions
Symptoms
The first layer does not bond well to the build plate and parts detach early in the print.
⚡ Quick fix
Clean the plate, recheck Z-offset, and slow down first-layer speed.
Causes
- ▸Profile mismatch between material and print settings.
- ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
- ▸Unstable temperature or moisture-sensitive filament handling.
Solutions
- ✓Re-run a short calibration print and adjust one parameter at a time.
- ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
- ✓Use material-specific presets and confirm temperatures with a test model.