3D Pilot

3D Printing Troubleshooter

3D Printing Troubleshooter

The most common print issues and how to solve them

24

Library

24

Visible

24 issues in library
🔍

3D printing issue

ID: wet-filament

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Stringing (cobwebs)

ID: stringing

Symptoms

Thin filament threads appear between separate print sections. Surfaces can look fuzzy and require manual cleanup.

⚡ Quick fix

Lower nozzle temperature by 5 C and increase travel speed; then tune retraction for your extruder type.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: over-extrusion

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: z-wobble

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: power-restart-issues

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Probe / Auto Bed Leveling chyby

ID: probe-leveling-error

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

MMU/AMS chyby (multicolor feed)

ID: mmu-ams-errors

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: fan-cooling-failure

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Poor first-layer adhesion

ID: bad-adhesion

Symptoms

The first layer does not bond well to the build plate and parts detach early in the print.

⚡ Quick fix

Clean the plate, recheck Z-offset, and slow down first-layer speed.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: layer-splitting

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: stringing-petg

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: resin-basics

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Nastavte Bottom Layer Count na 6–10 vrstev s Bottom Exposure 30–60 s.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Under-extrusion (insufficient flow)

ID: under-extrusion

Symptoms

Walls show gaps, top layers look sparse, and lines may be incomplete or brittle.

⚡ Quick fix

Raise nozzle temperature by 5-10 C and verify nozzle condition plus filament feed path.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Ghosting (ringing)

ID: ghosting

Symptoms

Repeated ripples appear after sharp edges due to mechanical vibration at higher acceleration.

⚡ Quick fix

Lower acceleration values and verify belt tension plus frame rigidity.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: elephant-foot

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Nastavte Elephant Foot Compensation 0.1–0.2 mm v sliceru (Cura, OrcaSlicer, PrusaSlicer).
Open detail →

3D printing issue

ID: support-scars

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: layer-shift

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: first-layer-quality

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: hotend-leak

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

Warping (corner lift)

ID: warping

Symptoms

Corners lift from the build plate, especially on larger flat parts or in colder rooms with airflow.

⚡ Quick fix

Increase bed temperature slightly, add a brim, and reduce draft around the printer.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: verified-sources-library

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓First layer issues (Prusa): https://help.prusa3d.com/article/first-layer-issues_1804
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Steel sheet profiles (Prusa): https://help.prusa3d.com/article/steel-sheet-profiles_1955
Open detail →

Clogged nozzle

ID: clogged-nozzle

Symptoms

Filament flow is weak or stops completely, often with extruder clicking or skipping sounds.

⚡ Quick fix

Perform a controlled cold pull and check nozzle cleanliness before resuming print jobs.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: pillow-effect

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →

3D printing issue

ID: sd-network-print-fail

Symptoms

Symptoms are not localized yet. Open details for a structured troubleshooting checklist.

⚡ Quick fix

Apply a conservative profile, verify first-layer quality, and recalibrate before the next full print.

Causes

  • ▸Profile mismatch between material and print settings.
  • ▸Mechanical setup drift (belt tension, leveling, or nozzle condition).
  • ▸Unstable temperature or moisture-sensitive filament handling.

Solutions

  • ✓Re-run a short calibration print and adjust one parameter at a time.
  • ✓Inspect hardware path: nozzle, extruder grip, bed condition, and belts.
  • ✓Use material-specific presets and confirm temperatures with a test model.
Open detail →